MIC-3927
Compatible with PICMG 2.1, 2.16, and 2.9-compliant componentsMonitors via the Intel®ligent Platform Management Bus (IPMB) protocolProvides isolated IPMI signals for each slotformaximumsecurityandreliabilityOutofbandmanagement interfaceHot swap
The MIC-3927 is a proprietary form factor Chassis Management Module (CMM) intended for use with PICMG* 2.1, 2.16, and 2.9-compliant systems (the CompactPCI* Hot Swap, Packet Switching Backplane, and System Management specifications respectively). The MIC-3927 plugs into a dedicated slot in compatible systems. It provides... More
相关产品
External rear-panel interface connector for the MIC-3325 CPU board
Supports VGA,LAN , USB 2.0, COM, SATA interface
One VGA , one RJ-45 LAN, and two USB ports USB on the rear panel
Two on board COM pin
4-port RS-232/422/485
32bit 33MHz PCI bus backplane
Speeds up to 115200 bps
16C550 Compatible 5G Register Set
2KV Surge protection
Support 5V only power input
RIO Support 4-port or 8-port RS-232/422/4
Up to 64-bit/66 MHz CompactPCI® Interface
Supports one single-size PMC site in 4HP width
Comprehensive EMC shielding
For card 1 with internal PCIe and USB interface
For card 2 with SATA interface
PICMG CPCI-S.0 CompactPCI® Serial
Standard 3U 4HP CompactPCI® form factor
Up to four Intel® i210 Ethernet controllers
Four or two 10/100/1000BASE-T Ethernet ports via RJ-45 connectors
Two LAN ports switchable to rear (MIC-3958R)
Com
GPS based on 50 channel u-blox lea-6s module
32bit 33/66MHz PCI bus backplane
UART interface for GPS module
Accuracy 2.5 m CEP
PICMG 2.0 Rev. 3.0 compatible
|
